9113-1-1 Ethernet Bridge II
for the Allen-Bradley Ultra 3000 Digital Servo Drive

The Model 9113 Ethernet Bridge II allows an Allen-Bradley PLC such as the MicroLogix 1100 or CompactLogix L35E to monitor and control an Ultra 3000 Servo Drive over an ethernet connection. The 9113 connects to the Ultra 3000 CN3 port using a cable provided and to the PLC via a 10/100 auto sensing ethernet port. The PLC will access the 9113 as though it were another PLC using File/Element addressing. A pre-defined, pre-loaded map exists within the 9113 that associates Ultra 3000 Host Command Reference parameters to File/Element numbers.

1¼" wide, 4 high, 4¼" deep


-- Quick Links --

Go to Software Section    Go to Documents Section
Go to Cable Section   Online 9113 Help



The 9113-1-1 allows A-B Ultraware software to access the Ultra 3000 drives over an ethernet network when used with the Quartech Ethernet Gateway program.

Click here for more information.

        9113-1-1 Ethernet Bridge II with Ultraware support

Shown below is the simplest application which does not require an ethernet hub or switch.
The PLC will access drive parameters using the Message Instruction.

The 9113 provides a bridge to a single drive. When an application requires multiple drives
to be controlled then each drive will have an associated 9113 with a unique IP address.
An ethernet hub or switch will be required to connect the devices.

The 9113 allows a PLC to read and write parameters within the Ultra 3000 drive using the Message Instruction. The parameters in the Ultra 3000 are mapped to File/Element numbers so the PLC accesses the Ultra parameters as though they were File/Elements in a peer SLC500 PLC


A free utility is available that will find the File/Element number associated with an Ultra 3000 parameter you select. The utility will run along with RSLogix and will remain on top unless minimized. This allows you to quickly select a parameter, copy the associated File/Element number to the Windows clipboard then paste the number into the RSLogix Message Instruction setup dialog.

Features:
Software

   9113-1-1 Utility Software & Project Files

The 9113-1-1 utilities installation program is provided as a ZIP file.To download the zip file using Internet Explorer, right-click on the icon then choose Save Target As. To install the program on your computer, first unzip the file then start the .exe program from the windows RUN menu. Setup will install the program in the directory of your choice and create program links in the program manager.

The utility programs have successfully ran under the following operating systems:
Windows XP SP3,  Windows 7 Ultimate (32 Bit).

The utility programs included are:
Download 9113 Utilities 9113-1-1 Utilities Package
File name: 9113-1-1_V130.zip   Release Date May 4, 2011

When unzipped the following file is produced:
Install_9113-1-X_Utilities_V130.exe
Windows 7 Note:   Right-click installer and choose: Run As Administrator.
GoTo U-Access Page U-Access Software
 Create an Ultra 3000 user interface on your PC for testing, start-up, tweaking, and monitoring. Its Quick, its Easy, its Fun, its Free!
Download Project File MicroLogix Incremental Index Sample Program
This is a RSLogix 500 program that allows a MicroLogix processor to control an Ultra 3000 drive. The project is for a single incremental index with Start, Stop, Pause, Resume, and Jogging functionality.

File name: QAN-901A48-Rev0.zip
Download Project File MicroLogix Multiple Index Sample Program
This is a RSLogix 500 program that allows a MicroLogix processor to control an Ultra 3000 drive. The project provides configuration and execution for all 64 indexes plus Start Index and Define Home functionality.

File name: QAN-901A49-Rev0.zip
Download Project File MicroLogix Preset Position Sample Program
This is a RSLogix 500 program that allows a MicroLogix processor to control an Ultra 3000 drive. The project allows move to position with a single bit plus provides a teach mode that allows you to jog to the desired position and save it.

File name: QAN-901A50-Rev0.zip
Download Project File SLC505 Incremental Index Sample Program
This is a RSLogix 500 program that allows a SLC505 to control the Ultra 3000 drive in Jog mode, and Incremental Indexing mode.

File name: QAN-901A47-Rev0.zip
Download Project File CompactLogix Sample Program
This is a RSLogix 5000 program file that allows a CompactLogix processor to control the Ultra 3000 drive in Setpoint Velocity mode.

File name: QAN901A39-Rev0.zip
Download Project File CompactLogix Message Controller Subroutine Program
This is a RSLogix 5000 program file that is a stand alone version of the Message Controller used in QAN901A39 and QAN901A41. Copy-and-paste it into any CompactLogix processor program.

File name: QAN901A40-Rev0.zip
Download Project File CompactLogix Sample Program
This is a RSLogix 5000 program file that allows a CompactLogix processor to control the Ultra 3000 drive in Setpoint Velocity mode, Preset Position mode, and Incremental Indexing mode.

File name: QAN901A41-Rev0.zip
Download Map FIle These are text files that list all the mapped addresses. One file is sorted alphabetically on the Ultra 3000 Parameter Name while the other file is sorted numerically on the PLC File/Element number. Provided for reference only.

File name: 9113_Parameter_Association.zip
View Video Clip This is a short video clip that describes how to assign
a static IP address to the 9113.


9113-1-1 Version History

Please allow us to inform you of software upgrades by filling out a registration form.

Register Software

Cables

   Communication Cables

The following communication cables are available from Quartech. To view the electrical schematic and mechanical diagram click on the cable number.

#2180      9113 serial port to Ultra 3000 CN3 port (supplied with unit)
#2182      9113 serial port to 9120 Multiplexer

Manuals

   Product Manuals & Documentation

To download a document using Internet Explorer, right-click on the link then choose Save Target As.

PM9113-1-1_Rev0.pdf 9113 Ethernet Bridge II Product Manual, Revision 0

QAN-901A35-R3.pdf Application Note:
How to configure the Message Instruction
in a CompactLogix, MicroLogix, and SLC505 processor

QSL-901A42-R0.pdf 9113 Ethernet Bridge II Sales Literature

QAD-901A43-R0.zip 9113 Ethernet Bridge II product drawing
in AutoCAD 2000 .DWG and .DXF format

QAN-901A44-R1.pdf Product Migration 9113-0-0 to 9113-1-1


Documents in Acrobat PDF format require Adobe Reader for viewing. Adobe Reader may be downloaded from Adobe by clicking this icon.