9113-1-1 Version History               [use Back button to close this window]
===============================================================================

   May 4, 2011
   Update release.
   --------------------------------------------------------------------------
   1. Ultra 3000 Ethernet Gateway update (V1.3.0.1)
      Allow assignment of virtual communication port number
      to Ultraware version 1.80.

   Published files:
      Install_9113-1-X_Utilities_V130.exe

*******************************************************************************

   October 7, 2010
   Update release.
   --------------------------------------------------------------------------
   1. Ultra 3000 Ethernet Gateway update (V1.02)
      Gateway would not allow activation if comment field was
      left blank in the association table.
   2. Hardware firmware update (V1.20)
      If user scaling was selected the DHCP startup mode (DIP 2 on)
      would never succeed unless the 9113 was connected to the drive
      and a scale value read was successful.

   Published files:
      Install_9113-1-X_Utilities_V120.exe

*******************************************************************************

   April 15, 2010
   Update release.
   --------------------------------------------------------------------------
   1. Fix SLC505 communication problem.
   2. Add Drive Status Extended parameter L020:111
   3. Fix opcode association for Velocity Error Limit N011:061
   4. Add Velocity Error Limit Enable parameter B010:039	

   Published files:
      Install_9113-1-X_Utilities_V110.exe

*******************************************************************************

   November 13, 2009
   Initial release on Web.
   Starting Serial Number 60001
   --------------------------------------------------------------------------
   Published files:
      Install_9113-1-X_Utilities_V100.exe
      
*******************************************************************************
*******************************************************************************

   .....Use Back Button to close this window.