Model 9610 Pushbutton Station

The 9610 is a discrete input/output push button panel that features sixteen switches and sixteen tricolor light emitting diodes. Each of the sixteen membrane switches control a reed relay and can be independently configured as a momentary push-button, a push-on push-off selector switch, or a push to latch switch. Sixteen tricolor Light Emitting Diodes (LED) can be independently configured to follow the state of the associated optical coupler input or relay output. The on and off color is specified for each LED. The entire configuration for the 9610 is accomplished through the keypad by enabling setup utilities via DIP switches accessed through the rear cover. Slip in legend tags allow the LEDs and switches to be customized for a particular application. 4¼" wide, 6¼ high, 2" deep

All configuration to the 9610 is accomplished through the keypad using three setup utilities enabled via DIP switches. Configuration information is stored in EEPROM memory allowing it to be changed when your application changes.

An individual LED can be configured to follow the state of its associated input number, associated output number, or disabled. When a LED is enabled you also specify the color displayed for the off state and on state of the controlling input or output. You can also specify if the LED will light steady or flash.

An individual switch can be configured to function as a momentary push button, a push-on / push-off selector switch, or a push to latch switch.

Momentary Push Button:
Pressing the switch will cause the associated relay output to close. It will remain closed until the switch is released.

Push-On/Push-Off Selector:
Pressing the switch will cause the associated relay to change state. The relay is unaffected when the switch is released.

Push to Latch:
Pressing the switch will cause the associated relay to close. The relay is unaffected when the switch is released. If the associated input has not been configured to unlatch the relay then it will remain closed until power is removed from the 9610. The associated input can be configured to unlatch the output when it changes state, Off-to-On or On-to-Off. While the relay is open the state changes on the associated input are ignored.

---

Removable terminal blocks simplify wiring.

---

LegendMaker Software:

File name: LegendMaker-V105.zip  744KB When unzipped the following file is produced: Install_LegendMaker_V105.exe

The LegendMaker utility is used to create function key labels, printed using your ink jet or laser printer, that can be inserted into the key pockets of the 9610. The pockets are exposed by rolling back the rubber gasket along either edge of the 9610. It is best to apply an adhesive backed laminating film to the front and back of the label. This will add strength and provide additional moisture protection.

Manuals

---

Product Manuals & Documentation

---

To download a document using Internet Explorer, right-click on the link then choose Save Target As.

PM9610-Rev0.pdf	Product Manual, Revision 0
QAD901A38-R0.zip	9610 product drawings in AutoCAD 2000 .DWG and .DXF format
QCT901A37-R0.pdf	Mounting template for the 9610
	Documents in Acrobat PDF format require Adobe Reader for viewing. Adobe Reader may be downloaded from Adobe by clicking this icon.